Solar Filter Safety
Take care with your filters: it takes only a moment to damage your eyes.
In the days and weeks before an eclipse occurs, news stories in the media provide information on what will happen and how to watch the event safely. Unfortunately, despite the best intentions, inaccurate or confusing information on safe observing techniques is often provided. This is especially true when the recommendations concern protective filters for directly observing the Sun. (Here is a list of solar filter suppliers.)
I first published solar filter data in Sky & Telescope's August 1981 issue (page 119); in the years since then new filters intended for both visual and photographic uses have come on the market. In June 1996 I participated in a NATO-sponsored meeting on solar-eclipse astronomy. This prompted me to make spectrophotometric measurements of a variety of materials and assess whether they provide adequate protection for the eyes. These included such oddball items as the internal magnetic disk of a 3½-inch floppy, multiple layers of space blanket (a very thin type of aluminized polyester film), CDs, and metal-coated polyester food packaging.
How the Eye is Damaged
Solar radiation reaching the surface of the Earth ranges from ultraviolet light at wavelengths as short as 290 nanometers (2,900 angstroms) to radio waves in the meter range. Lifetime exposure to solar ultraviolet radiation is an established contributor to accelerated aging of the outer layers of the eye and skin and the development of cataracts.* But more immediate damage takes place from directly observing the Sun with inadequate eye protection. The eye will transmit most of the radiation between 380 nanometers (violet) and 1,400 nanometers (near infrared) to the light-sensitive retina, resulting in retinal burns.
Exposing the retina to high-intensity visible light triggers a series of complex chemical reactions within the light-sensitive rod and cone cells. The products of these reactions impair the cells' ability to respond to light and in extreme cases can destroy them. Depending on the severity of the damage, an affected observer experiences either a temporary or permanent loss of visual function. This photochemical injury occurs mainly when the retina is exposed to blue and green light.
Both photochemical and thermal retinal injuries occur without the victim's knowledge, as there are no pain receptors in the retina, and the visual effects do not occur for at least several hours after the damage is done.
For wavelengths between 380 and 1,400 nanometers, we find that a filter with a transmittance of 0.0032 percent, corresponding to a shade number of 12, provides "adequate" retinal protection during solar viewing. However, this does not take into account visual comfort, in which case a darker filter having a transmittance of 0.0003 percent (shade number 14) is often preferable.
Relative Safety of Filter Materials
There are numerous solar filters on the market that weren't evaluated here because of their similarity to other items tested. The purpose of this effort was to determine the general types of materials that make safe filters, not to compare similar designs by different manufacturers.
Not surprisingly, I found a wide disparity in the attenuation of visible light by these materials, even among the "safe" filters. For example, the differences in processing methods and chemistry gave varying optical densities for the silver-bearing black-and-white film emulsions. The double-layer filters had shade numbers ranging from 11 to 16.
Floppy disks have only a marginally safe infrared transmission and produce poor-quality images of the solar disk. The magnetic medium scatters visible light to such an extent that you see a dull red disk surrounded by a broad halo of red light. I would not recommend using this material for a solar filter.
Aluminized polyester and glass filter materials gave the most consistent performance. Most of the items specifically designed for eye protection easily met all of the transmittance criteria for safe filters. I would avoid aluminized polyester used in packaging for food products and collector cards because of the inconsistent optical quality, though the particular pop-tarts wrapper I tested performed surprisingly well. (It rated as marginally safe.)
Acceptable and Unacceptable Filters
Unsafe filters include any photographic emulsion bearing an image, chromogenic (non-silver-bearing) black-and-white film, black-processed color film, photographic neutral-density filters, and polarizing filters. Although these materials have very low visible-light transmittance levels, they pass an unacceptably high level of near-infrared radiation. The black color film is a good example, having a shade number of 15 for visible light but transmitting almost 50 percent of the infrared radiation!
Smoked glass had very good performance in terms of radiation transmission. However, it is a dangerous filter material for two reasons. First, it is very difficult to produce a uniform heavy coating of soot on glass. Second, the coating is fragile. The filter is very easy to destroy by handling much of the soot on my sample came off because of contact with its protective wrapping. It also made quite a mess.
Acceptable solar filters for unaided visual observations include aluminized polyester specifically designed for viewing the Sun, shade 12, 13, and 14 welding filters, black polymer filters, and two layers of fully exposed and developed silver-bearing black-and-white negative film.
For photographic and aided visual use, particularly with binoculars or telescopes, acceptable filters include aluminized polyester specifically designed for the purpose and Type 2-Plus glass filters. The Thousand Oaks Type 3-Plus filter should be used with extreme care for photographic use only.
Not recommended are metal-coated polyester film that is not specifically intended for solar observation, smoked glass, floppy disks, black color transparency (slide) film, chromogenic film (not tested here), and compact discs (because of the inconsistent quality of the metal coating).
My data and further comments on safe solar fillers appear on the NASA/GODDARD eclipse page.
* Editor's note: If you wear glasses outdoors, you can greatly reduce your lifetime UV exposure by having UV-blocking coatings applied to your glasses. This option is so cheap and easy that anyone should do it. Also, polycarbonate lenses block UV without needing coatings.